PREFABRICATED CHIMNEYS

Start-kominy-prefabrykowane

Baumat chimneys are intended for: fireplaces, stoves (using gas, oil or solid fuel) and construction of ventilation ducts in civil structures. Chimney elements have been designed with dimensions that allow combining them into groups and applying on multiple storeys. Thanks to that they can be applied in both single-family and multi-family buildings.

FLUE CHIMNEY TYPE K1

APPLICATIONS

1. The use in the gas, oil and solid fuel boilers
2. The contribution of the chimney designed to work for the exhaust gas temperature up to 600 ° C
komin-k1

EQUIPMENT

  1. The contribution of acid resistant stainless steel and heat resistant steel (depending on the type of furnace) having a diameter of 180 mm
  2. The insulation is made from the ventilated mineral wool system
  3. Two ventilated ducts diameter of 160 mm
  4. condensate collector (draining of any condensate)
  5. washout hole with inspection door
  6. Flue gas connection
  7. Ventilation grate 20x14 cm at the bottom of the chimney (for excellent ventilation of the thermal insulation of combustion shaft)
  8. Ventilation grates 14x14 cm at inlets and outlets of ventilation shafts
  9. The concrete chimney cap with elements of the head of the internal combustion shaft (ceramic roof and downpipe )

 

VENTILATION CHIMNEY TYPE K2

APPLICATION

To perform ventilation ducts in buildingskomin-k2

EQUIPMENT

1. Two ducts diameter of 160 mm
2. Ventilation 14x14 cm at inlets and outlets of ventilation shafts
3. Profiled concrete chimney cap
4. Alternatively, instead of the ventilation duct, chimney exhaust pipe may have resulted from the sewer head above the chimney cap

KOMIN WENTYLACYJNY TYP K3

APPLICATION

To perform ventilation ducts in buildingskomin-k3

EQUIPMENT

1. Three ducts diameter of 160 mm
2. Ventilation 14x14 cm at inlets and outlets of ventilation shafts
3. Profiled concrete chimney cap
4. Alternatively, instead of the ventilation duct, chimney exhaust pipe may have resulted from the sewer head above the chimney cap

ADVANTAGES

1. Provides good draft.
2. Resistant to corrosion.
3. The use in each apartment building
4. The applicability of the exhaust pipes from the sewer instead of the ventilation duct
5. Quick and easy to install (supplied for the construction of the chimney in one piece)
6. The outer surface of the chimney finished for the painting works
7. Ability to design and build the chimneys of any height
8. The chimney of the exterior modular dimensions can be combined into complex of chimneys (see type K1 and K2)
9. Possibility of cladding textures on the visible part of the chimney (eg. Imitation brick or wood)

TECHNICAL CONDITIONS

1. Implementation of elements in accordance with EN-13369: 2055 / A1 AC / 2008: "Common requirements for precast concrete."
2. Production of concrete in accordance with BS EN 206-1: 2003: "Concrete - Part 1 - Specification, performance, production and conformity."